KEIM Concretal-W
Sol-silicate based opaque protective concrete coatings with light-resistant color pigments. (According to W degree of protection).
Concretal-W is water repellent. Protection degrees: Water protection, chloride protection, weather resistance
Colour shades: KEIM Palette exclusiv
Application: Roll, brush or airless sprey (nozzle diameter: 0.79 mm)
Consumption: For 2 layer: approx.0 0.35 kg/m² + 0.02 lt/m² Concretal-Fixativ
Packaging: 5 kg ve 25 kg buckets
KEIM Concretal-W-Grob
Concretal-W-Grob is used as a primer on repaired concrete surfaces. Concretal-W-Grob removes capillary cracks, matches textural differences, etc.
Colour shades: KEIM Palette exclusive
Application: brush
Consumption: For primer layer: aprrox. 0.20 kg/m² + 0.02 lt Concretal-Fixativ
Packaging
5 kg and 25 kg buckets
KEIM Concretal®-Lasur
Sol-silicate one-component paint for translucent or opaque thin-layer coatings. Particularly economical protective concrete protection.
Transparent applications can be made to show the texture and material properties of the concrete material on which it is applied.
Degree of protection: Weather protection
Colour shades: Concrete grey, KEIM Palette exclusiv
Application: Roll, brush
Consumption: For two layer: approx. 0.25 lt/m² Concretal-Lasur + 0.04 lt KEIM Concretal-Fixativ
Packaging : 1 lt and 15 lt buckets
You can download KEIM Concretal-Lasur TDS.
KEIM Concretal®-Base
Sol-silicate-based, pigment-free additive for KEIM Concretal-Lasur. KEIM Concretal-Base is mixed into KEIM Concretal-Lasur as a low pigment topcoat additive.
In this way, the desired transparency can be created by maintaining the ideal application consistency and film thickness.
Consumption : Depending on the mixing ratio and per layer: approximately 80-150 ml / m2 of the pre-made mixture of Concretal Lasur and Concretal-Base.
The consumption data specified are guideline values and may vary depending on the desired finish, application method and structure of the application surface.
The exact values can be determined by painting trial areas on the application surface.
Packaging : 5 and 15 lt buckets
You can download KEIM Concretal-Base TDS.
KEIM Concretal®-MKH
Protection against mineral corrosion (rusting) for concrete and forming a bond bridge (adhesive bridge).
Colour : Grey
Application: Brush
Consumption: As corrosion protection: 0.12 kg/ m2 – for 16 mm rebars – As bond bridging : 1,0 kg/ m2
Packaging : 20 kg bags
You can download KEIM Concretal-MKH TDS.
KEIM Concretal®-Universalmörtel-S
It is a fast repair mortar used in the repair of concrete and fair-faced concrete surfaces. This mortar, which provides protection against corrosion, is reinforced with fiber.
Colour : Grey
Application: Spreying or trowel
Consumption : For 1mm thickness 1,60 kg/ m2
Packaging : 25 kg bags
You can download KEIM Concretal-Universalmoertel-S TDS.
KEIM Concretal®-Spezialvergütung
Water-dilutable resin for cementitious fillings. It is a filling material used by adding KEIM Concretal-Feinspachtel together with water.
Mixing ratio at 20°C; 25 kg dry KEIM Concretal-Feinspachtel 4.5 lt water and 1.5 lt KEIM Concretal-Spezialvergütung. KEIM Concretal-Spezialververnung is first added to water and mixed well with water. Depending on the temperature conditions, it is recommended to make a sample before applying the product.
Consumption: 60 ml / m2
Packaging : 25 lt bags
You can download KEIM Concretal-Spezialverguetung TDS.
KEIM Concretal®-Mörtel-R
It is fiber reinforced concrete repair mortar. Add KEIM Concretal-Mörtel-R to the water for the mixture. Mix with a mixer or a low speed mixer for about 5 minutes until you get a homogeneous mixture.
Colour: Grey
Application: Spreying, trowel
Consumption: For 1mm thickness 1,80 kg/ m2
Packaging : 25 kg bags
You cand download KEIM Concretal-Moertel-R TDS.
KEIM Concretal®-Fixativ
It is a silicate diluent suitable for use with KEIM Cooncretal W, KEIM Concretal W GROB, KEIM Concretal Lasur.
Colour : Milky
Packaging : 5lt and 20 lt buckets
You can download KEIM Concretal-Fixativ TDS.
KEIM Concretal Feinspachtel
It is a fine structural repair mortar for concrete repair. Mix 20 kg powder and 3.4 – 3.6 lt water homogeneously for about 5 minutes. The application time is approximately 45 minutes.
The surface / air temperature can be applied between 5 and 30 °C